Energiespareinstellungen (Debian): Unterschied zwischen den Versionen
Matt (Diskussion | Beiträge) |
Matt (Diskussion | Beiträge) |
||
Zeile 38: | Zeile 38: | ||
== Disable Sleep on Login Screen (Untested) == | == Disable Sleep on Login Screen (Untested) == | ||
On a default installation of Debian the login screen is provided by the Gnome Display Manager, or GDM in short. It can be customized as follows: | |||
=== Settings in Debian DConf (seems not to work) === | === Settings in Debian DConf (seems not to work) === |
Version vom 3. Juni 2021, 12:53 Uhr
Festplatte Spindown aktivieren
# nano /etc/hdparm.conf
command_line {
hdparm -B 200 /dev/sda
}
Werte 1 bis 240 sind in 5 Sekunden-Schritten, Werte 241 bis 251 sind Schritte von 30 Minuten.
Festplatte Spindown deaktivieren
Entweder in Root-Terminal:
hdparm -B 255 /dev/sdx
Oder in /etc/hdparm.conf
die o. g. Einträge wieder auskommentieren. Evtl beides?
Disable Suspend and Hibernation
If the operation system should not attempt any type of suspend or hybernation, the appropriate targets need to be disabled at the systemd level:
systemctl mask sleep.target suspend.target hibernate.target hybrid-sleep.target
Re-enable hibernate and suspend with the following command:
systemctl unmask sleep.target suspend.target hibernate.target hybrid-sleep.target
Restart systemd-login service or reboot:
systemctl restart systemd.logind.service
Check if changes have been applied:
systemctl status sleep.target suspend.target hibernate.target hybrid-sleep.target
Sources:
- https://wiki.debian.org/Suspend#Disable_suspend_and_hibernation
- https://ostechnix.com/linux-tips-disable-suspend-and-hibernation/
Disable Sleep on Login Screen (Untested)
On a default installation of Debian the login screen is provided by the Gnome Display Manager, or GDM in short. It can be customized as follows:
Settings in Debian DConf (seems not to work)
Open dconf
Go to org/gnome/settings-daemon/plugins/power/
Try to change the following settings:
- sleep-inactive-ac-timeout -> 0
- sleep-inactive-ac-type -> 'nothing'
- sleep-inactive-battery-timeout -> 0
- sleep-inactive-battery-type -> 'nothing'
Settings in greeter.dconf-defaults
Edit /etc/gdm3/greeter.dconf-defaults
Uncomment and change following lines to:
sleep-inactive-ac-timeout = 0 sleep-inactive-ac-type='nothing'